Specification

Burst Test with expansion

Model: P1022

Standards:

ECE R110, ISO11439

Specifications:

• Test medium: water

• Pressure range: 1~200Mpa

• Test port: 1port

• Pressure precision: ±0.5%FS

• Test precision: <=2ml

• Power supply: 220VAC, 2phases, 50Hz

• Driven air supply: 7bar@2NM³/min

• Explosion-proof test chamber (optional)

Specimen suited to burst test with expansion bench:

Interior picture of burst test with expansion bench:

• Burst with expansion test hose, pipe and tubing.
• Test high pressure vessels and cylinders.
• Wellhead equipments and Christmas Tree testing with burst expansion test.
• Chemical reagent injection system and high pressure reactor or tubing
• Fire extinguisher equipments testing

Features:

• Outlet pressure up to 500Mpa can be easily and precisely adjusted / controlled, and the speed of pressurization can be set as request, which was guaranteed by high pressure air driven pumps made in USA.
• Wider testing pressure and larger flow capacity with 2 pump units
• All high pressure valves, tubing are made in USA with 316SS, water, oil, creamy liquid and other liquids are applicable.
• Two stages controlled by PC and PLC/ MCU, the whole testing process can be completely operated through PC. Provide test reports with graphical and matrix form, all the data saved for later analysis and printing. 
•  Manual operation is also available as stand by.
• To keep pressure constant with high precision. The pressure booster automatically stops and restarts sensitively and promptly according to the real-time pressure drop.
•  Pressure relieves by PC or manual alternatively. Higher reliability based on alert system of over pressure, over time and pressure drops. 
•  Testing site is monitored by video at real time. *(Optional)
•  IVS-Test software ensures the easy operation and monitor through the PC friend interface when performing the burst with expansion test.