Tantalum capacitor, tantalum fittings fasteners, tantalum rods

Tantalum profile

Tantalum (Ta) has the features of ductile, easily fabricated, highly resistant to distortion by high temperature and corrosion by strong acids, and a good conductor of heat and electricity and has a high melting point. The major use for tantalum, as tantalum metal powder, is in the production of electronic components, mainly tantalum capacitors. Major end uses for tantalum capacitors include portable telephones, pagers, personal computers, and automotive electronics. Alloyed with other metals, tantalum is also used in making carbide tools for metalworking equipment and in the production of super alloys for jet engine components.
SinoDevices have the following Tantalum products:
• Capacitor Grade Tantalum Wire
• Tantalum Furnace Parts
• Tantalum Crucible / Tray
• Tantalum fittings / fasteners
• Tantalum bar
• Tantalum Alloy Tubing
• Tantalum alloy plate / strip
Tantalum metal has for decades been acknowledged as the metal with the highest corrosion in hot acids. In most acidic media no significant corrosion rates of tantalum can be measured. We supply premium grade tantalum parts and we have solved many of the problems typically are involved when working in tantalum.

• Capacitor Grade Tantalum Wire

Capacitor grade tantalum wire is mainly used in the tantalum electrolyte capacitors’ manufacturing. According to the condition and specification, the company produces more than 30 types and the smallest diameter can be Φ0.10mm.

Technical Data:

LC≤0.10µA/cm2
Formation condition:
Formation liquid: 0.1%H3PO4
Formation temperature: 90±2°
Density of the frmation Current: 5mA/cm2
Formation voltage/time: 225V/30min

Specification (mm)	diameter tolerance (mm)
0.10～0.15	±0.005
>0.15～0.30	±0.006
>0.30	±0.007

Mechanical properties

Product condition	Tensile strength (MPa)	Elongation (%)
Annealled	300～600	10～30
Half annealled	>600～1000	<5
Unannealled	>1000	<5

• Tantalum Furnace Parts

Tantalum is highly resistant to distortion by high temperature, therefore it is widely used for high-temperature applications, such as sintering, sputtering, melting of refractory, rare and noble metals, to be heating elements, shield and Tantalum Furnace Parts.

We can make the Tantalum Furnace Parts by customized.

• Tantalum Crucible / Tray

Tantalum crucible (tray) is widely used in sintering of capacitor anode, sputtering equipment, melting of refractory, rare and noble metals.

Tantalum Crucible Tray

We can make the Tantalum Crucible / Tray by customized.

• Tantalum fittings / fasteners

Tantalum fittings / fasteners are optimized concerning chemical and mechanical performance. Due to its melting point of 2996℃, density of 16.68g/cm3, heat transfer coefficient of 54W/M.K @ 25℃, high conduction, high heat stability and high anti-corrosion, tantalum has versatile functions in many mechanical manufacturing applications.

Tantalum_fittings_fasteners

STANDARDS: ASTM B708、ASTM B365.

We can make the Tantalum fittings / fasteners by customized.

• Tantalum rods

Tantalum rods are used as the components in the alloy of Ta-in, Ta-radix and corrosion-resistant alloy. It is widely applied in the electronic, petroleum, chemical, aerospace and aviation industries etc.

tantalum bar

Standard: Q/NSL012-1991

Class	Content of impurities，％，≤
Class	Nb	C	O	N	Fe	Ni	Cr
Ta-1	0.01	0.02	0.20	0.01	0.01	0.005	0.005
Ta-2	0.02	0.04	0.30	0.02	0.02	0.010	0.010
-	Ti	W	Mo	Si	Zr	Al	Cu
Ta-1	0.003	0.003	0.003	0.02	0.003	0.003	0.003
Ta-2	0.005	0.005	0.005	0.02	0.003	0.005	0.005

Remarks:

1) The appearance of the Tantalum rods is steel-like gray.

2) The bending along length direction must be less than 2%.

• Tantalum Alloy Tubing

Tantalum alloy (Ta-2.5W, Ta-10W, Ta-40Nb) tubings have the following advantages: high melting point, corrosion-resistant, facilely-processed in cold environments. They are widely applied in chemical industry, high temperature technology field, atomic energy industry to build reaction container and heat exchanger, pipe, condensator, clip heater, helix loop, U-pipe in the chemical courses, thermocouple with its protective pipe, liquid state metal container and Tantalum Alloy Tubing etc.

Tantalum Alloy Tubing

Standards: ASTM B 521－98 GB/T 8182－1987

We can make the Tantalum Alloy Tubing by customized.

• Tantalum alloy plate / strip

Tantalum alloy plate / strip are widely used for deep drawing, CPI equipments.

Tantalum alloy plate / strip

Height Width Length

0.05—0.10mm      ≤ 152mm          customized
0.10—0.20mm      ≤ 250mm          customized
0.20—3.00mm      ≤ 650mm          customized
3.00mm—            ≤ 1000mm        customized
Standards: ASTM B708, ASTM B365

SinoDevices Tantalum offers the advantage of:

Enhanced Mechanical Stability
Composed with a pure c.p. tantalum surface supported by strong steel based core, the tantalum components are mechanically more stable than solid c.p. tantalum.

Overcomed the Hydrogen Embrittlement phenomena, more safe
Our tantalum is supported by core that is not sensitive to hydrogen embrittlement, it is safe in situations where normal tantalum components will fail due to hydrogen embrittlement.

Cost efficient production of using tantalum components
Due to our highly efficient production procedures we can offer tantalum products with most competitive price.